Scrapers

Scrapers

Rowse Scrapers are durably built, with all welded construction, to last for years of heavy-duty, low-maintenance use.

Their versatility allows you to move dirt, level land, dig holes, clear areas and drain or fill low spots. The complete operation is controlled by one single-spool, double-acting hydraulic control valve.

The Rowse 300 Model Hydraulic Scraper is designed for loading with smaller horsepower tractors but "built tough" for use with larger tractors, too. The Scraper's 8ft. wide cutting edge is wider than its wheels; and, when teamed with a single rear wheeled tractor, lets you cut or fill close to exisitng structures or fences. The main hinge pivots are 2¼" cold rolled shafts with bronze bushings. Two double-acting hydraulic cylinders with 1½" chrome shafts position the scraper for loading, carrying and dumping. The 300 Model is available with two front wheels and other options.

The Rowse 500 Model and theRowse 700 Model Scrapers are designed for use with two or four-wheel drive tractors. Both have a gooseneck hitch to allow 90° turns for easy maneuverability around obstacles.

Rowse Scrapers feature heavy-duty frames of rectangular steel tubing for strength and stability.

The main hinge pivots are 2¼" cold rolled shafts with bronze bushings. Two double acting hydraulic cylinders, with chrome shafts (2" Model 500, 2" Model 700), position the scraper bucket. A depth gauge is standard on the 500 Model and the700 Models.

Rowse Scrapers feature heavy-duty frames of rectangular steel tubing for strength and stability. A 3-piece frost blade attaches to a double reinforced bucket edge for maximum strength. The 8ft. cutting blades are removable, reversible, roadgrader-type steel. With fingertip operation from your tractor seat, the precise hydraulic control gives you an adjustable load or spread depth from 2" to 13".

The 500 Model, 700 Model, XL500, and theXL700 Scrapers are protected by a shear pin in the tongue should an immovable object be struck. All Rowse Scrapers are equipped with transport bolts for safe transporting behind a pickup at highway speeds.

MODEL 3002 • MODEL 3004

Rowse 300 Series Scraper

Capacity, heaped.....................................3 cubic yards (approx.)
Width of cut.............................................................................95¾"
Overall Width...........................................................................111"
Box Width, front to rear gate....................................................43"
HP Requirements............................................................50 and up
Weight.................................................................Approx. 2000 lbs.
Hydraulic Requirements.............One double-acting control valve
Blade...............................................Removable, high carbon steel
(3-piece high carbon steel frost blade)
Tires....................................95L x 15, 6-ply included with Scraper

MODEL 5002 • MODEL 5004

ROWSE 500 SERIES SCRAPER

Capacity, heaped.......................................5 cubic yards (approx.)
Width of cut.............................................................................95¾"
Overall Width...........................................................................113"
Box Width, front to rear gate....................................................48"
HP Requirements............................................................70 and up
Front dump spreading depth............................................2" to 13"
Weight.................................................................Approx. 4000 lbs.
Hydraulic Requirements.............One double-acting control valve
Blade..........................Removable, reversible, 3-piece pacal steel
(8" wide frost blade)
Tires.............................................................(42 psi) 11L x 15, 8 ply

MODEL 7002 • MODEL 7004

ROWSE 700 SERIES SCRAPER

Capacity, heaped.......................................7 cubic yards (approx.)
Width of cut...........................................................................95¾"
Overall Width.........................................................................113"
Box Width, front to rear gate..................................................48"
HP Requirements...........................................................85 and up
Front dump spreading depth..........................................2" to 13"
Weight...............................................................Approx. 5000 lbs.
Hydraulic Requirements...........One double-acting control valve
Blade..............Removable, reversible, 3-piece high carbon steel
(8" wide frost blade)
Tires.....................................(50 psi) 12.5L x 16, 12-ply or 14-ply

XL Models in Tandem

When you move a lot of dirt, the ROWSE Tandem Model Scrapers, with their extra heavy-duty construction, will keep you moving for years with a combined capacity of up to 14 cubic yards when heaped. ROWSE builds Tandem Scraper Models XL500 and XL700. Both have standard 3-piece high carbon steel cutting edges with complete operation controlled by two double-acting control valves. The Tandem Models all have the same dependable standard features as the corresponding regular models.

The Tandem XL500 and XL700 Scrapers are equipped with dual rear wheels for stability and added weight capacity. A rear push bar for added loading is standard.

The gooseneck hitch of the rear scraper attaches to the 3" welded ball mounted inside the push bar. Very little additional horsepower is needed to operate the the scrapers in tandem. Each scraper is loaded separately.

A depth gauge is standard on the500, 700, XL500 and XL700 models. At a glance, the gauge indicates to the operator that the blade is at ground level for a more precise operation.

XL Specifications

Tandem Models correspond to Regular Models with these exceptions

Model XL500
Weight.............................................................................Approx. 4400 lbs.
Hydraulic Requirements......................Two double-acting control valves
Spindles...................................................................................................2"
Tires..............................................................................(6) 11L x 15. 8-ply

Model XL700
Weight.............................................................................Approx. 5630 lbs.
Hydraulic Requirements......................Two double-acting control valves
Spindles.................................................................................................2¾"
Tires...........................................................(6) 12.5L x 16, 12-ply or 14-ply

(Specifications subject to change without notice. Rowse Hydraulic Rakes Co., Inc. is not responsible for making changes or additions to equipment previously sold.)

Rowse Quality

Rowse Quality    

All ROWSE Products are 100% made in the USA, and built ROWSE TOUGH for years of dependability, and low maintenance costs.
For over 50 years their goals of quality and customer satisfaction assure you that you are getting the best available product for your money!

Contact

Burwell Plant
84504 State Hwy 11
Burwell, NE 68823

308-348-2276
800-445-9202 or 800-652-1912

Fax: 308-348-2059
E-mail: rowserakes@rowserakes.com