SINGLE BAR MOWERS
|
|
PTO DRIVE SINGLE BAR MOWERS |
|
|
| Home | Single Bar Specs |
| Compare ROWSE vs IHC/New Idea | Compare ROWSE vs New Holland |
Tough with the Flexibility to Adjust to Your
Mowing Conditions |
"QUICK ATTACH" TRAILING MOWER A tough mower for your mowing jobs. This trailing single-bar mower features "Quick Attach" hookup to free your tractor for other needs in minutes. Other features include a rugged V-Belt drive and a break-away safety release to protect the cutter bar. The bar re-latches automatically and easily when mower is backed up. The mower is available with your choice of either 5', 7', or 9' cutter bar. For easy transporting and inspecting, the bar is raised to a vertical position hydraulically. The bar may also be lowered hydraulically to below ground level 20° for cutting along ditch banks or terraces. |
Operation requires a 540 RPM tractor PTO shaft and one single acting hydraulic valve to raise and lower the cutter bar. This constant velocity virtually eliminates excessive vibration and protects against possible damage to the drive line.
 |
3-POINT MOUNTED MOWER Tough enough for the big jobs, but versatile enough to get the corners. The ROWSE 3-Point mounted mower is designed to easily maneuver around your tight spots, cutting those tough crops with ease. Other features include a rugged V-Belt drive and a break-away safety release to protect the cutter bar. The bar re-latches automatically and easily when mower is backed up. The mower is available with your choice of either 5', 7', or 9' cutter bar. For easy transporting and inspecting, the bar is raised to a vertical position hydraulically. The bar may also be lowered hydraulically to below ground level 20° for cutting along ditch banks or terraces. |
Tractor requires a 540 RPM PTO shaft and only one single-acting hydraulic valve to raise
and lower the cutter bar. The mower attaches to a standard 3-point hitch and fits most
ASAE category 1 and 2 tractors.
Your ROWSE Mower can be equipped with the NH** type Pitmanless
Mower Head and Cutter Bar. The Pitmanless design with parallel drive
motion reduces noise, vibration and eliminates any sickle register adjustment.
The design also reduces wear on the cutter bar assembly for trouble-free operation.
Tapered roller bearings are throughout the Pitmanless
Drive Head for durability and less maintenance. The sickle runs at 1600
strokes per minute with long strokes between guards to allow more of the
crop to be cut in one stroke while the sickle remains at top shearing speed.
When you choose the IHC* type Balanced Mower Head and Cutter Bar, you have
selected a Balanced Head designed with just three moving parts, riding on six
precision tapered roller bearings. There are no pitmans, gears or connecting rods
to cause problems. The balanced head converts speed and power to fast powerful
sickle strokes. The sickle runs at 2,000 strokes per minute for fast efficient
cutting action and faster travel through the field. Sickle stays sharp longer too!
**NH - New Holland
*IHC - International Harvestor Co.
OTHER ROWSE PRODUCTS:
Rowse Single Bar and Double Bar Mowers
Rowse Hay Rakes
Rowse Windrow Fluffers
Rowse Scrapers
Rowse Calf Cradles
Rowse Bale Haulers
Rowse Powder Coating
Website created and designed by Mike Depko